View ADC20013RS3P1_6726944.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

08/2007 s3 package modifed 16 pin soic adc20013 950-2050 mhz dbs tuner ic data sheet - rev 2.11 figure 1: functional block diagram feature s ? monolithic dbs tuner ic ? on chip oscillator ? 6 db noise figure ? 11 db conversion gain ? single + 5v supply ? small size ? low cost ? high reliability ? surface mount package ? rohs compliant package option product description the anadigics dbs (direct broadcast satellite) tuner ic is intended for use in high volume, low cost manufacturing of compact dbs tuners for satellite receivers and integrated satellite ready tv/vtr receivers. the adc20013 tuner ic provides dbs tuner manufacturers the ability to produce, in high volumes, tuners with low component count, minimal tuning, small size, high reliability and exceptional price- performance ratios. the adc20013 offers a high degree of functionality in a very small and user friendly confguration. lo if osc rf dd v
adc20013 2 data sheet - rev 2.11 08/2007 figure 2: pinout t able 1: pin description pin name description pin name description 1 gnd ground 16 gnd ground 2 if out if output 15 v dd_osc oscillator supply 3 v dd_mix mixer supply 14 osc out oscillator output to pll 4 gnd ground 13 gnd ground 5 gnd ground 12 gnd ground 6 rf in rf input 11 lo ta nk lo tank circuit 7 gnd ground 10 gnd ground 8 gnd ground 9 gnd ground
adc20013 data sheet - rev 2.11 08/2007 3 t able 2: absolute minimum and maximum ratings electr ical characteristics stresses in excess of the absolute ratings may cause permanent damage. functional operation is not implied under these conditions. e xposure to absolute ratings for extended periods of time may adversely affect reliability. t able 3: operating ranges t he device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifcations. parameter min max unit v dd /v if 0 +7 vdc v lo -5 +0.5 vdc v rf -10 +0.5 vdc v osc -5 +0.5 vdc storage temperature -55 +100 c input power rf +10 dbm input power lo +17 dbm parameter min typ max unit frequency rf lo if 950 1430 - - - 480 2050 2530 - mhz mhz mhz v dd - +5 - vdc case temperature -55 - +85 o c
adc20013 4 data sheet - rev 2.11 08/2007 t able 4: electrical specifcations (t a = 25 o c; v dd = + 5v) notes: (1) measured in anadigics test fxture with toshiba 1sv186 off-chip-varactor. (2) includes external coupling through test fxture. (3) oscillator output for external pll. (pin 14) (4) measured at 1450 and 1750 mhz. (5) measured using pll (lbw =1 khz, reference = 1.25 mhz, step size = 10 mhz). (6) measured in anadigics test setup. (7) see smith charts. parameter min typ max unit conversion gain (6) 6 11 - db ssb noise figure (6) - 6.5 11 db third order imd (4) (-20 dbm tones, 5 mhz apart) - - 40 -35 dbc second order imd (-20 dbm input level) - - 25 - 20 dbc lo leakage (1),(2) rf port if port - - - 30 0 - 25 3 dbm dbm lo output level for pll ( 3) -8 - 4 - dbm tuning voltage (1) (vt) 1 - 20 volts vco phase noise (5) 10 khz offset 100 khz offset - - - 70 - 100 - 65 - 95 dbc/hz dbc/hz input impedance (7) - - - - output impedance (7) - - - - power supply current - 60 85 ma
adc20013 data sheet - rev 2.11 08/2007 5 figure 3: t est circuit
adc20013 6 data sheet - rev 2.11 08/2007 performance da t a figure 4: conversion gain and noise figure vs frequency figure 5: oscillator t uning curve figure 6: third order imd rf input power level -20dbm/t one figure 7: vco phase noise
adc20013 data sheet - rev 2.11 08/2007 7 figure 9: output impedance data (if) figure 8: input impedance data (rf) in pu t im pe da nc e da ta ( rf ) 1. i mp eda nce r ef er ence a t pi n 6 2 . v co o n vt = 3 .2 0 volt s 3 . v dd = + 5 v ol ts 4 . u se e xte rnal b ia s te e fo r if 1 0. 9 50 gh z 8 .4 0 - 61. 53 j 2 1. 2 50 gh z 8 .1 2 - 34 .5 3 j 3 1. 5 50 gh z 1 0. 13 - 1 9. 90 j 4 1. 7 50 gh z 1 2. 75 - 8 .7 0 j 5. 1 .9 00 gh z 1 5. 23 - 3 .0 3 j 6. 2 .0 50 gh z 1 6. 33 - 0 .2 7 j -b p 5 +b p -5 -2 1 2 3 -. 5 -. 2 4 5 6 0 .2 .5 1 2 5 .2 .5 1 2 me as ure d in 5 0 sys te m -1 ou tp ut i mp ed an ce d at a (i f) 1 . i mp eda nce r ef er ence a t pi n 2 2 . v co o n vt = 3 .2 0 volt s 3 . v dd = + 5 v ol ts 4 . u se e xt er na l b ia s te e fo r if - b p 5 2 1 .5 .2 0 .2 . 5 1 2 5 -. 2 -. 5 -1 -2 6 54 3 2 1 +b p -5 me as ure d in 5 0 sys te m 1 0. 40 g hz 2 6. 8 - 8 2. 8 j 2 0. 48 g hz 2 2. 2 - 7 0. 0 j 3 0. 50 g hz 2 1. 4 - 6 7. 5 j 4 0. 60 g hz 1 8. 1 - 5 6. 2 j 5. 0 .7 0 gh z 1 5. 9 - 4 8. 7 j 6. 0 .8 0 gh z 1 4 - 4 1. 2 j
adc20013 8 data sheet - rev 2.11 08/2007 figure 10: lo impedance data figure 11: m tf vs. t case 1 5 00. 0 mh z - 6 0. 83 - 1 69. 80 j 2 1 000 .0 m hz - 15 .1 5 - 54 .4 1 j 3 1 430 .0 m hz - 5 .7 1 - 2 4. 62 j 4 1 700 .0 m hz - 2 .8 0 - 1 2. 02 j 5. 1 92 2. 0 mh z - 2 .8 3 - 4 .2 5 j 6. 2 76 8. 0 mh z 0. 54 - 11 .3 1 j measure di n5 0 syste m 1. im pedance reference at pin 11 2. vd d = + 5 v ol ts -.17 0 .2 .5 1 2 5 6 5 4 3 2 -1 -. 5 -. 2 . 2 .5 1 2 -5.8 -2 10 12 10 11 10 10 10 9 10 8 10 7 10 6 10 5 10 4 10 3 10 2 3 00 28 0 26 0 24 0 22 0 2 00 1 80 16 0 14 0 12 0 1 00 8 0 60 tcase ( 0 c) m t f ( h rs) jc ~ 60 0 c/ w
adc20013 data sheet - rev 2.11 08/2007 9 figure 12: s3 package outline - modifed 16 pin soic packag e outline
adc20013 10 data sheet - rev 2.11 08/2007 notes
adc20013 data sheet - rev 2.11 08/2007 11 notes
adc20013 data sheet - rev 2.11 08/2007 12 w arning anadigics products are not intended for use in life support appliances, devices or systems. use of an anadigics product in any such application without written consent is prohibited. import ant notice anadigics, inc. 141 mount bethel road warren, new jersey 07059, u.s.a. tel: +1 (908) 668-5000 fax: +1 (908) 668-5132 url: http://www.anadigics.com e-mail: mktg@anadigics.com anadigics, inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. the product specifcations contained in advanced product information sheets and preliminary data sheets are subject to change prior to a products formal introduction. information in data sheets have been carefully checked and are assumed to be reliable; however, anadigics assumes no responsibilities for inaccuracies. anadigics strongly urges customers to verify that the information they are using is current before placing orders. ordering informa tion order number temperature range package description component packaging adc20013s3ctr -55 o c to +85 o c modified 16 pin soic tape and reel, 3500 pieces per reel ADC20013RS3P1 -55 o c to +85 o c rohs compliant modified 16 pin soic tape and reel, 3500 pieces per reel

▲Up To Search▲

Price & Availability of ADC20013RS3P1

	To Download ADC20013RS3P1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .